Genie Z-25J Uživatelský manuál stáhnout pdf (Strana 48)

Operator's Manual Fourth Edition · First Printing

46 Z-45/25 • Z-45/25J Part No. 114339

Transport and Lifting Instructions

Free-wheel Configuration for

Winching

Chock the wheels to prevent the machine from

rolling.

Release the non-steer

wheel brakes by

turning over the drive

hub disconnect caps

(see below).

Be sure the winch line

is properly secured to

the drive chassis tie

points and the path is

clear of all obstructions.

Reverse the procedures described to re-engage the

brakes.

Note: Towing the Genie Z-45/25 or the Z-45/25J is

not recommended. If the machine must be towed,

do not exceed 2 mph / 3.2 km/h.

Disengage

Engage

Observe and Obey:

Genie Industries provides this securement

information as a recommendation. Drivers are

solely responsible for making sure machines

are properly secured and the correct trailer is

selected pursuant to US Department of

Transportation regulations, other localized

regulations, and their company policy.

Genie customers needing to containerize any lift

or Genie product should source a qualified

freight forwarder with expertise in preparing,

loading and securing construction and lifting

equipment for international shipment.

Only qualified aerial lift operators should move

the machine on or off the truck.

The transport vehicle must be parked on a level

surface.

The transport vehicle must be secured to

prevent rolling while the machine is being

loaded.

Be sure the vehicle capacity, loading surfaces

and chains or straps are sufficient to withstand

the machine weight. Genie lifts are very heavy

relative to their size. See the serial label for the

machine weight. See the Inspections section for

the serial label location.

Be sure the turntable is secured with the

turntable rotation lock before transporting. Be

sure to unlock the turntable for operation.

Do not drive the machine on a slope that

exceeds the uphill, downhill or side slope rating.

See Driving on a Slope in the Operating

Instructions section.

If the slope of the transport vehicle bed exceeds

the uphill or downhill maximum slope rating, the

machine must be loaded and unloaded using a

winch as described. See the Specifications

section for the slope ratings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

Komentáře k této Příručce

Žádné komentáře

Genie Z-25J Uživatelský manuál Strana 48

Komentáře k této Příručce